Synaps

Release notes

3D section cuts, custom sunlight, and Microsoft sign-in


Covers 11 November 2026 through 17 November 2026

Explore cutting through a building in its 3D window and move a custom sun anywhere over it. Sign in with Outlook, create multiple views from one image, and edit more walls at once.

New Sign in with Outlook Use a personal, work, or school Microsoft account to sign up or log in.

Synaps already supports Google sign-in and email-and-password accounts.

Personal Microsoft accounts, including Outlook.com and Hotmail.com, are supported, as are work and school accounts unless an organization blocks the app.

To use: On the login or sign-up page, choose Continue with Outlook.

New Cut through a building in 3D Use a Section control to reveal the inside of a building in its 3D view.

Every building in Synaps has a 3D view that shows its floors, walls, roof, and stairs as a model you can orbit and zoom. Now, section cuts make it easier to inspect the interior.

The top row of the 3D window holds a Section button. With it pressed, drag the top of the building down to cut a plan, or drag a side inwards to cut a section. You can reposition a cut by dragging it. Press Section again to end the cut. A cut remains in place when you close and reopen the 3D window.

Improved Position the sun freely in 3D Place a custom sun anywhere on a guide dome over your building in 3D, using your pointer or keyboard.

Synaps can show sunlight and shadows on your building. By default, the sun is linked to a site’s location, date, and time. Unlink it to position the sun yourself.

When the sun is unlinked, a dome appears above the building with compass directions around its edge. Drag the sun across the dome to adjust the light and shadows.

With the sun selected, use the Left and Right arrow keys to turn it by 5° (45° with Shift), and the Up and Down keys to raise or lower it by 1° (10° with Shift). The link button stays at the bottom of the 3D view while you orbit. Linked sunlight works as before, and previously saved custom lighting is preserved.

New Generate new angles from an image Turn one image into four views of the same subject from different angles.

You can place images on the canvas, such as a rendering or a model photo. When you select an image, its toolbar offers AI actions, including Remove Background and Expand.

Generate angles is now in the image toolbar for everyone. It creates four new images of the selected picture, seen from 90° and 45° to the left and from 45° and 90° to the right. Each view appears as soon as it is ready.

To use: Select an image and choose Generate angles in its toolbar. Every run uses 50 Synaps AI credits.

New Crop images and change their opacity Crop a reference photo, scanned plan or rendering on the canvas, and fade it with an opacity setting.

Images on the canvas are often references, such as a site photo or a scanned plan you trace over. Until now, showing only part of an image or making it lighter meant editing it in another program and importing it again.

With this release, the crop tool is now located in the image's toolbar. To select the visible area, drag the frame as needed, then press Enter or click outside the frame to apply the changes. Press Escape to cancel the action. Additionally, images include an Opacity setting under the Appearance section, which can be adjusted as a percentage. Images start at full opacity.

Improved Edit walls with different layer setups together Select walls with different build-ups and adjust shared settings in one place.

Walls can have layers for structure, insulation, and finish, each with its own thickness and appearance. Together, these layers make up a wall’s build-up.

When build-ups differ, the panel shows a card for each one, including its layer count, total thickness, and number of walls. You can also edit height and vertical offset for multiple walls.

Improved Leave a team yourself Members who are not owners can now leave a team from Team settings.

A team shares projects and files among its members. Owners manage the team, while other members and guests work in the files they have access to.

Team settings now has a Leave this team card under General for everyone except owners. It explains what you will lose before you leave, such as access to the team's files and, where it applies, your editor seat. Guests who only have access to some files get their own card in Members with a Leave team option.